Improved Manicure Electric Drill Kit Nail Set File Tool

1. Improved handpiece holding area to prevent overheating during a long period of usage 2. Good for pedicure and manicure

                 ship from ZS

              Domestic shipping

Features:1. 100% Brand new in retail box package2. Compact handpiece easy to grip3. Professional Electric Nail Machine with easy to use dialing speed control4. Forward and reverse operation switch5. Rotation speed reaches up to 4,000 RPM6. Extremely quiet and smooth, no vibration when using.7. The drill can be controlled by foot pedal / main machine speed control8. Foot pedal for easy operation and comfort9. Improved handpiece cable ending design so that the cable will not loose out easily10. Improved handpiece holding area to prevent overheating during a long period of usage11. Good for pedicure and manicure12. The nail file can be used for natural as well as artificial nails13. For professional salon use or home use

Specifications:Main (power supply & control) partRated voltage range: 110-220V,50/60 HzRated power input:10-15WOutput rated voltage: DC 3-12VOutput current: 0.8A

Handpiece (motor) partWorking voltage: DC 3-12VRated current: 0.8ARated speed: 4000 -20000 rpmSanding bands size: 0.6 x 0.8 x 1.3cm (Inner dia x Outer dia x L)Bar of bit size: 2.3 - 3.4 cm (Length)

Package included:1 x Main (power supply & control)6 x Bits6 x Sanding bands1 x Foot Pedal Power Control1 x Handpiece1 x Purple stand1 x User manual

Installation and wire connection:Connect the 5-pin plug of the portable grinding head/hand piece to the Output socket at the main panel.Connect the pedal switch to the FOOT S/W socketSelect grinding mould of different sizes according to actual requirements, and fasten it into the front of the portable grinding head.Switch the speed control to the left.Connect with the main source power.

Operation:Press the function switch on the right to HAND for manual control,the indicator will be on and the grinding head starts to moving slowly. The diode LED 1-2 will be on.Turn the SPEED CONTROL to the right to accelerate the grinding head. And all the LED indicators for the speed will be on.When the function switch is pressed to FOOT, step on the pedal, the speed will be accelerated, and loose the foot, the speed will decrease. (foot switch is optional)The turning directions can be swapped. FWD means clockwise direction and REV means counterclockwise directionAdjust the speed of the grinding head within a reasonable rangePlease adjust the handpiece to lowest speed before changing forward/backward direction

Instructions:Don't change the turning directions too frequently, otherwise, it will damage the grinding head.Turn the SPEED CONTROL counterclockwise to decelerate the grinding head the minimum before turning off and switch the main power source to 0.After operation, put the grinding head on the top of the main panel.While the grinding head is in operation, never pull out the 5-pin plug of the portable grinding head.For long idle time. please disconnect the source powerAny unauthorized disassembling of the product is prohibited. In case of any breakdown, please contact the agent or authorized repair center. We promise swift, high-quality and satisfactory serviceIf the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly question in order avoid a hazard